1 minute read

22 Starting the Car for the First

RIPP Supercharger JEEP Wrangler 3.8

DO-NOT USE QUICK CONNECTS ON ANY WIRE IN THIS TRUCK PERIOD!

 Properly solder all connection Be sure to seal plug with sensor safe silicone if mounted under hood.

 Some wires are pass-through and others are cut through pay attention to the cut through wires. When you cut a wire there are two sides, the ECU side denotes half leading to the ECU. The Engine side is the wire leading to the engine. (Attention Critical Step)

 Some wires are “T’d” connections pay close attention to these wires

16

This article is from: