You can then reinstall and route the hose as imaged Remove the hose holder to make room for later steps
The lower hose circled in the above image will get zip tied to the lower part of the
battery tray.
Drill a few holes in the lower battery tray that was previously cut, fit 1¼” wire
loom over hose to clear the exhaust manifold. In the event that you are running an after market exhaust header wrapping the header and the hose may be necessary. Note: There is a small flap with an orange or white sticker on some passenger side valve cover. If it interferes it will require trimming, this can be done now or when installing the supercharger in Step-12
