6 Extend Battery Wires

RIPP Supercharger JEEP Wrangler 3.8

Step: (6) Extending the Battery terminals DO NOT CUT GREEN WIRE-IT IS A FUSIABLE LINK

 Now that you’ve relocated the battery you will need to extend the factory terminals. This is a very straight forward task.  Cut factory terminals as per first illustration  Strip back approximately a quarter inch of wire insulation exposing copper wire

 Crimp and Solder supplied wires for best results use multiple layers of heat shrink tubing and use a good quality black electrical tape as an extra precaution.

 Route in-between fuse box and chassis  Be sure to hook up positive and negative correctly.

6