8 Relocate Intake Air Sensor

RIPP Supercharger JEEP Wrangler 3.8

Step: (8) Air Temp Sensor Relocation (ATS)

 Relocating the ATS to the drivers side fender

 Remove OEM ATS from the rubber intake tube

 Using supplied extension wire properly solder and heat shrink corresponding colored wires to assure a water tight connection. Do Not Mix Them Up.

 Using supplied wire loom route extended wire along AC line towards driver’s side fender and head light.  Locate slot cut in supplied air filter sponge and tuck neatly over sensor.

8