12 Install Supercharger and Position

RIPP Supercharger JEEP Wrangler 3.8

Step (12): Dropping in the blower

 Locate dowel pin and dowel pin hole on bottom of shaft, use this to align the shaft into place. The Dowel pin hole is oval for belt adjustment in

later steps.

 Drop in blower and shaft into bracket and lightly tighten via the four 4mm

(5/32”) Allen-head screws.

 Route oil drain line away from header and zipper-tie along power steering line on frame rail.

 Locate the oil drain line affixed to blower. Note: the oil drain fittings are preinstalled and tightened – DO NOT OVER TIGHTEN THEY WILL BREAK.

12