RIPP Supercharger JEEP Wrangler 3.8
Step (14): Black Box – Fuel and Timing Controller
Black box mounts on drivers side inner foot well as shown with the small square supplied Velcro Automatic transmission vehicles (yellow image) can utilize a pre-existing hole in the firewall intended for the clutch slave cylinder. 6 Speed vehicles (red vehicle) have two options 1) Drill a hole in the firewall and mount as shown below or 2) option to leave the Black Box under the hood. The later is less advisable because proper precautions will need to be followed to do so. For example using silicon to seal the back end of the Black Box harness and/or installing it in a rubber condom or balloon to protect it from moisture.
Locate ECU on Drivers side engine compartment Unplug the four large black ECU plugs and remove covers to expose wires NOTE Clips do break (its ok) pry gently to open and expose wires
Solder - Heat shrink - and Tape -ALL connections 15
Copyright RIPP Modifications LLC 2008 all rights reserved
