RIPP Supercharger JEEP Wrangler 3.8
Step (11) installing fuel system: (Attention Critical Step)
Locate the factory fuel lines located on the passenger side of the engine between the valve cover and intake manifold. There is a small 7 inch section that is hard plastic. Split the line with a razor as shown in the first image exposing the metal line. Install supplied Tee fitting with supplied 5/16” x 16” fuel lines and clamps as pictured.
In later steps the open Tee will be finally hooked up to the main injectors
11 Copyright RIPP Modifications LLC 2008 all rights reserved
