RIPP Supercharger JEEP Wrangler 3.8
Step: (8) Air Temp Sensor Relocation (ATS)
Relocating the ATS to the drivers side fender
Remove OEM ATS from the rubber intake tube
Using supplied extension wire properly solder and heat shrink corresponding colored wires to assure a water tight connection. Do Not Mix Them Up.
Using supplied wire loom route extended wire along AC line towards driver’s side fender and head light. Locate slot cut in supplied air filter sponge and tuck neatly over sensor.
8 Copyright RIPP Modifications LLC 2008 all rights reserved
