RIPP Supercharger JEEP Wrangler 3.8
Step: (6) Extending the Battery terminals DO NOT CUT GREEN WIRE-IT IS A FUSIABLE LINK
Now that you’ve relocated the battery you will need to extend the factory terminals. This is a very straight forward task. Cut factory terminals as per first illustration Strip back approximately a quarter inch of wire insulation exposing copper wire
Crimp and Solder supplied wires for best results use multiple layers of heat shrink tubing and use a good quality black electrical tape as an extra precaution.
Route in-between fuse box and chassis Be sure to hook up positive and negative correctly.
6 Copyright RIPP Modifications LLC 2008 all rights reserved
