CHAPTER 11 TRANSPORTING SMV EMBLEM & REFLECTORS (Fig. 125) GEHL Company complies with all laws for safety when transporting slow-moving vehicles on public highways. The Baler is equipped with a Bracket for mounting a Slow–Moving Vehicle (SMV) emblem. The Baler is also equipped with Red Reflector Strips on the rear corners of both Twineboxes.
NOTE:
1.
Chain is sufficiently slack to allow turns and movements of either the tractor or the farm implement, without placing tension on chain.
2.
Chain is of sufficient strength to hold the decoupled implement (and its load) and tow it to the shoulder.
WARNING
The SMV emblem MUST be purchased
locally.
ALWAYS follow state and local regulations regarding use of a safety chain and transport lights when towing farm equipment on public highways. ONLY a safety chain (NOT an elastic or nylon/plastic tow strap) should be used to retain the connection between the towing and towed machine, in the event of separation of the primary attaching system. BE SURE to check with local law enforcement agencies for your own particular regulations. Unless otherwise prohibited, use a Slow-Moving Vehicle (SMV) emblem.
When the Baler is equipped with the Quick Wrap option, a SMV Decal is already attached to the back of the Quick Wrap. See Decal chapter for details.
1
1
2
2 3
1 – Transport Lights 2 – Red Reflector Strip (Back of each Twinebox) 3 – SMV Emblem Mounting Bracket
Fig. 125
Because of the variations in safety laws for different states and localities, it may be necessary to change the Emblem Bracket location. Your local GEHL dealer can assist you in making the location change.
1
2 3
SAFETY CHAIN & TRANSPORT LIGHTING (Figs. 125 & 126) 5
As required or when desired, the Baler can be equipped with a Safety Chain for travel on public highways. Refer to the Optional Features & Accessories chapter for ordering information. The Safety Chain should be attached to the tractor and Baler as shown. When attached in this manner, the safety chain should have the following characteristics:
Printed in U.S.A.
4
1 – CV Stand in “Storage” Position 2 – Locking Hitchbolt 3 – Drawbar Clevis (Provided) 4 – Chain Secured Around Tractor Frame Member 5 – Safety Chain Attached Around Baler Frame
Fig. 126
101
907520/CP0600
