Table 5: Control Keypad Indicators Item
Indicator
Description
Details
A
High-Speed Travel Range Indicator
Indicates high-speed travel range is activated.
B
Lift Arm Float Indicator
Indicates lift arm float is activated.
C
Hydraglide™ Indicator
Indicates HydraglideTM lift arm cushion is activated.
D
Engine Pre-heat Indicator
Is lit when ignition keyswitch is in the ON/RUN position and engine pre-heat is required; goes out when engine pre-heat is complete.
E
Seat Belt Reminder Indicator
Is lit when ignition is turned on as a reminder to lower the safety bars and fasten the seat belt.
F
Battery Voltage Warning Indicator
Indicates battery charging system malfunction. During normal operation this indicator should be OFF.
G
Indicates engine air filter requires service. See “Engine Air Engine Air Filter Restriction Indicator Cleaner”. During normal operation this indicator should be OFF.
H
Indicates hydraulic oil filter requires service. See“Changing Hydraulic Oil Filter Warning Indicator Hydraulic Oil Filter”. During normal operation this indicator should be OFF.
I
Hydraulic Oil Temperature Warning Indicator
Indicates hydraulic temperature is too high. During normal operation this indicator should be OFF.
J
Engine Malfunction Indicator
Is lit when the engine electronic control unit (ECU) has detected an error condition. Refer to “Engine Diagnostic Trouble Codes (DTC)”.
K
Coolant Temperature Warning Indicator
Indicates coolant temperature is too high. During normal operation this indicator should be OFF. Indicates engine oil pressure is too low.
L
50950233/G0221
Engine Oil Pressure Warning Indicator
During normal operation this indicator should be OFF. IMPORTANT! Immediately shut down the engine if this indicator is lit. Correct the problem before restarting the engine.
43
