1 minute read
CHAPTER 9 TORQUE SPECIFICATIONS
from Gehl V4200 V420 (EU) V420 X-Series Skid-Steer Loaders Operator’s Manual 50950233 - PDF DOWNLOAD
Use these torque values when tightening hardware (excluding locknuts, and selftapping, thread-forming, and sheet metal screws) unless otherwise specified.
*All torque values are in ft.-lbs., except those marked with an *, which are in in.-lbs. For metric torque value (N·m), multiply ft.-lbs. value by 1.355, or the in.-lbs. value by 0.113.
Warning
THIS OPERATOR’S MANUAL IS PROVIDED FOR OPERATOR USE
Do Not Remove From This Machine
Do not start, operate or work on this machine until you carefully read and thoroughly understand the contents of this Operator’s Manual.
Failure to follow safety, operating and maintenance instructions can result in serious injury to the operator or bystanders, poor operation, and costly breakdowns.
If you have any questions on proper operation, adjustment or maintenance of this machine, contact your dealer or the Manitou Group Service Department before starting or continuing operation.
