Table 3: Status and Maintenance Screens Display Mode
Description
T
Error/Status/History Screens
DM1 1-8
SPN: 522619 FMI: 9 OCI: 1
Displays engine, drive system and control system error status and history code message information. The number of available messages is displayed at the top left of the screen (T). Press the left/right side of navigation rocker button (A, Fig. 5) to switch between screens and press the top/bottom of navigation rocker button to scroll through the codes. See “Error Codes” for specific error code details.
DIAGNOSTIC INPUTS Float HydraGlide High Gear Aux Detent Alternator Hyd Filter Clog High Hyd Temp Wiper Interlock
Ignition Run Ignition Start Seat Switch Restraint Bar LH Backup RH Backup High Flow FWD High Flow REV
DIAGNOSTIC INPUTS Park Brake Beacon/Work Lt Self Level Pow Tach Lock Pow Tach Unlock
Diagnostic Inputs/Outputs Status Screens
DIAGNOSTIC OUTPUTS High Gear Self Level Hydraglide Rear Work Lts Front Work Lts Starter All Tach Lock All Tack Unlock
Float Backup Alarm High Flow Rev High Flow Fwd Beacon Lts Disable Park Brake
Displays input/output electronic/CAN status. Press the left/right side of navigation rocker button (A, Fig. 5) to switch between input/output screens. Status colors indicate the following: • Green – Active • Blank – Inactive • Yellow – Short or open circuit
DIAGNOSTIC OUTPUTS Front Wiper Front Washer Rear Wiper Rear Washer Blower Low Blower Med Blower High Condenser Fan
40
50950233/G0221
