OPERATING INSTRUCTIONS
NOTE: If the machine has been out of use for some time, see “Starting up after storage” in the “Storage” Section. NOTE: See “Connecting booster batteries” in the “Electrical System” Section, if you have to start the engine using booster batteries. 1. Take up position correctly in the operator’s seat with the seat belt correctly fastened. See “Operator’s seat” in the “Controls/Instruments/Accessories” Section.
1
2
CD00E060
4. Turn the starter switch key (2) to “ON” position. 5. If necessary, enter the anti-theft code. See “Anti-theft device”.
TRIM THIS EDGE
3. Make sure the engine throttle button (1) is in low idle position. In cold weather, leave it in half-way position.
Alt= to hide template information Alt+ to display template information
STARTING THE ENGINE
CD00E005
CD00E061
In cold weather, the message “Eng. pre heat” appears on the systems display panel. See item 10 under “Systems display and control panel” in the “Controls/ Instruments/Accessories” Section.
89
TRIM THIS EDGE RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
2. Make sure the function cancellation lever is raised and the safety bar in inward position.
