1 minute read
OPERATING INSTRUCTIONS ................................................................. 82
(Machine with attachment) (Machine with attachment)
PDH0249 6. When moving from the ramps onto the trailer bed, raise the boom slightly as soon as the attachment touches the trailer so as to bring the machine level and then move forward until the machine is resting entirely on the trailer.
(Machine with attachment)
PDH0251 8. Bring the machine right to the front of the trailer and lower the attachment to the trailer bed.
(Machine without attachment)
PDH0250 7. When the machine is completely on the trailer, raise the attachment slightly and swing the upperstructure so as to bring the attachment round to the access ramp side.
CS99B519 8. Bring the machine right to the front of the trailer, swing the upperstructure 180°. 9. Lock the upperstructure swing function. 10.Stop the engine, remove the starter switch key, raise the function cancellation lever (with the safety bar inward). 11.Make sure that all doors, hoods and access panels are correctly locked.
125
TRIM THIS EDGE RIGHT PAGE TRIM THIS EDGE
