Controls Speed Shift Lever This lever (A) is located on R.H side of Steering. This lever enables 4 different speed options within a particular “Range Gear” selection. 1. Depress Clutch pedal completely. 2. Choose any one gear from 1 to 4 to match work application. 3. Release clutch pedal gradually. The gears can be shifted on-the-go. Refer to Chart for road speed of tractor in different positions.
A
Power Take-Off The PTO lever is located on the left hand side of Operator’s Seat. To engage the PTO, proceed as follows. 1. Move hand throttle lever to the low idle position. 2. Depress the clutch pedal fully up to the second stage. 3. Engage the power take-off shaft by moving the lever to the rearward position. 4. Engage the desired tractor gear (this does not apply if the tractor is to remain stationary). 5. Move throttle to obtain required power. 6. Release the clutch pedal gradually. To change gears without stopping the power take-off shaft, depress the clutch up to first stage, Change gears in the normal manner and release the clutch.
Loader Connection An easy option of connecting the loader valve is provided and the same can be connected as follows : 1. Remove the Connector (C) from Pipes (B) and (D). 2. Connect pressure line of Loader valve to Pipe (D). 3. Connect return line of Loader to Pipe (B) D
B
C
40 Model 25 25 4WD OPM/Sep-07
