Controls

Dual Clutch Dual Clutch Dual Clutch Dual Clutch Clutch

Constant running P.T.O. with dual clutch is offered as a speed of 540 rpm @ 2300 engine rpm. It has two clutch plates and two pressure plates and works in two stages . When the clutch pedal is depressed to the first stage, the drive of engine to main gear box gets disconnected, while the P.T.O. output shaft (if engaged) will continue to be driven by the engine.

standard feature on Mahindra 2525 4WD tractors. This has a

When the clutch pedal is depressed further to second stage, the drive to the PTO shaft also gets disconnected.

While changing transmission gears, it is necessary to depress the clutch pedal only up to the first stage. This will not affect the drive to the P.T.O. shaft. If it is required to stop the tractor but keep the P.T.O. running, only depress the clutch pedal through the first stage. This has great advantage while using PTO driven equipment. If an extra load is encountered, the forward movement of the equipment can be halted while still permitting full power to be available at the P.T.O.

F-R Shuttle Shift Lever F-R Shuttle Shift Lever Lever

This lever is located on L.H side of Steering. This lever enables to choose the direction of tractor motion and has three positions as follows:

Forward (A) - for forward motion of tractor.

Reverse( C ) – for reverse motion of tractor

Neutral (B )

The lever can be engaged as follows.

1. Depress Clutch pedal and stop tractor motion completely.

2. Choose Forward or Reverse mode as desired.

3. Release clutch pedal gradually.

Refer to Chart for road speed of tractor in different positions.

Range Shift Lever Shift Lever Lever

This lever is located on R.H. side below operator’s seat. The lever has 3 positions and can be engaged as follows.

1. High – High speed range

2. Low - Low speed range

3. Neutral every Speed

This lever enables 2 different speed options for Range selection. :: : The lever can be engaged as follows.

1. Depress Clutch pedal and stop tractor motion completely.

2. Choose H or L speed range to match work application.

3. Release clutch pedal gradually.

Refer to Chart for road speed of tractor in different positions.

Tractor road speed in different positions of F-R shuttle, for standard 12.5/80-18 tire as per rolling radius 492.5 m at

Range and Speed Levers.@ 1875 / 2500 engine rpm. 147 kPa pressure.

* Speed given above is in mph