INSTRUMENTS/CONTROLS
ANTI-THEFT SYSTEM To prevent the machine from being stolen it is possible to use the anti-theft system, which makes it necessary for a special code to be entered before the machine can be operated. Your Link- Belt Dealer has to activate the system for it to be operational. IMPORTANT: Once the code has been entered, do not forget it, as it can not be changed without consulting your Link-Belt Dealer.
Setting the code initially
3. Press the button (1) same number of times as the second digit (e.g. twice) and then press button (2) to proceed to the third digit. Repeat the procedure for the third and fourth digits.
1. Place the starter switch key in the ON position.
3 TRIM THIS EDGE The message Password and four boxes will appear on the display screen.
4. Once all four digits have been entered, press AUTO button (3) for th e c o d e to b e en te r e d i n t h e system. The audible alarm device will sound. 5. To finish entering the code, place the star ter switch key in “OFF” position.
1
IMPORTANT: Remember to keep careful note of the code number, because if you forget it, it will not be possible to enter a new one without consulting your Link-Belt Dealer.
2
2. To enter the code (e.g. 2323) press button (1) the same number of times as the digit selected (e.g. once), then press button (2) to proceed to the second digit.
52
TRIM THIS EDGE LEFT PAGE Bur 6-29160
