BEFORE USING THE HYDRAULIC BREAKER(OPTIONAL

● Whenever carrying out a welding operation on the undercarriage or upperstructure as authorized by the manufacturer and in accordance with his instructions, disconnect the batteries, disconnect the alternator B+ and D+ terminal wires and connect the welding apparatus ground cable to the component on which the welding operation is to be performed. Never connect the welding apparatus to the undercarriage when welding on the upper structure (or vice-versa). Never connect the welding apparatus ground to a component of the hydraulic system. ● When using compressed air, take the necessary precautions to protect your face. ● Clean the machine regularly. Accumulations of grease, dirt and debris can cause injuries or damage the machine. ● Follow the maintenance intervals and check the hardware used to mount the main components: counterweight, turntable bearing and operator’s compartment. In the event of problems, contact your authorized LBX Link-Belt distributor.

BEFORE USING THE HYDRAULIC

BREAKER(OPTIONAL)

● Do not attempt to operate the hydraulic breaker unless you have first read and completely understand the safety messages and instructions in this manual and those of the hydraulic breaker manufacturer. ● Operating the hydraulic breaker requires full attention and care on the part of the operator to avoid accidents. Know the hydraulic breaker’s capabilities, limitations and the working area required. ● Every day, inspect the hydraulic breaker to detect any signs of oil or hydraulic fluid leakage. Tighten the connections or replace any defective components and grease as necessary. ● Make sure the hydraulic breaker is in good condition. Never use a hydraulic breaker which is in poor condition or if there are components missing, as this could cause serious injury. ● Make sure the maintenance procedures explained in this manual are carried out correctly.