5-7 Swing Body: Swing Driving Unit 2 210 X2 Assembly and Disassembly of Swing Unit
Caution
1.Before starting disassembly, re-assembly, inspection or repair work, read this maintenance manual thoroughly and be sure you understand its contents. 2.Handle this product according to the separate "Usage Precautions". 3.Stop the equipment system this product is mounted on and wait for the surface temperature of this product to fall to about 40°C or less before removing this product from the equipment it is mounted on. Working on this product while it is still hot may result in burns. Whenever removing a pipe from this product, be sure to bleed the pressure. Removing a pressurized pipe without bleeding pressure inside can induce a blow out of oil, resulting in personal injury and oil leakage. 4.Use the special tools and measuring instruments when disassembling, re-assembling, inspecting or repairing this product. Using an inappropriate tool may result in burns and damage to the product. 5.Be careful not to drop parts when assembling, re-assembling, inspecting or repairing this product. Otherwise, personal injury or property damage may result. 6.Do not touch machined edges or threaded sections of parts directly with your bare hands when disassembling, re-assembling, inspecting or repairing this product. Doing so may result in personal injury. 7.After re-assembly, check the performance of the product. Do not use the product unless the performance has fully recovered. Otherwise, damage may result to the equipment. 8.The caution (mark !) in this maintenance manual does not encompass all cases. Be sure to act on the safety-first principle whenever disassembling, re-assembling, inspecting, repairing, etc. this product.
241
