3Removal and Installation of Travel Remote Control Valve Assembly

3 Removal and Installation of Travel Remote Control Valve Assembly

Warning •Be sure to release the hydraulic pressure before beginning work.

Caution •Be sure to stop the engine before beginning work.

•Wrench (17 mm, 19 mm) •Hexagon wrench (8 mm) •Phillips screwdriver •Marking pen •Caps •Plugs •Rags •Cleaning fluid

Items to prepare

[1] Use the screwdriver to remove the 3 screws (1), and then remove the cover (2).

[2] Remove the floor mat (1). 2

1

1

[3] Use a 8-mm hexagon wrench to remove the 2 installation bolts (1) on both sides, and then remove the left and right travel pedals (2).

[4] Use a 19-mm wrench to remove the 5 bolts (1), and then remove the under cover (2).

[5] Use a 19-mm wrench to remove the 6 hoses (1). •Mark the valve and hoses so that they can be connected correctly at the time of assembly. •Attach caps and plugs to the valves and hoses to prevent entry of water, dust, or dirt. •Clean the valves and hoses by spraying with a parts cleaner to prevent scratches and prevent dirt from accumulating on the connectors. 1 2

2 1

1

[6] Use a 19-mm wrench to remove the 2 hose adaptors (1).

[7] Use a 8-mm hexagon wrench to remove the 2 installation bolts (1) on both sides of the lever, and then remove the lever.

[8] Use a 17-mm wrench to remove the 2 fixing bolts (1) on both sides of the travel lever. 1

1

1

[9] Pull up the travel remote control valve into the cab, and then remove the travel remote control valve.