LOADING SHOVEL
EXPLANATION OF COMPONENTS
EXPLANATION OF COMPONENTS ●
Below provided are explanation of components necessary for operation of the machine. It is quite important to understand the operation of these controls as well as the meanings of the displays correctly for the right, safe and comfortable operation of the machine.
●
For explanations on each control from (1) through (9) and (11) through (32) shown in the overall view of controls, see the operation manual of the backhoe shovel.
SWITCHES AUTOMATIC LEVEL CROWDING/BUCKET ANGLE COMPENSATION SWITCH (If equipped)
WARNING If the bucket is loaded with this switch in the OFF position and the boom control lever is placed in the RAISE position, the load may fall off on the arm side, as the bucket moves in an arc. Operation must be performed with good care.
AUTOMATIC LEVEL CROWDING SWITCH This switch (33) is for selecting either an arc digging or automatic level crowding. ON: Automatic level crowding OFF: Arc digging ON position: Level digging can be done by operating the arm control lever just above the ground surface.
ON OFF
BUCKET ANGLE COMPENSATION SWITCH This switch (34) is for selecting either with bucket angle compensation or without. ON: With bucket angle compensation OFF: Without bucket angle compensation ON position: The bucket is kept at a constant angle when the boom is in a raised position.
7-4
ON OFF
