MONITOR SWITCHES

(1) Working mode selector switch (basic switch)(3) Heavy lift switch

(2) Auto-deceleration switch (selection switch)

WORKING MODE SELECTOR SWITCH (BASIC SWITCH)

This switch (1) is used to set the movement or power for the work equipment.

By selecting the mode to match the working conditions, it is possible to carry out operations more easily. Use the working mode selector switch to set to the most effective working mode to match the working conditions.

Working mode Applicable work

DH mode Large capacity digging, loading in a short time in quarry

H modeNormal digging, loading operations

G mode Fine operations not needing digging power or speed, Grading, leveling, hauling operations

When starting the engine, H (heavy-duty operation) mode is automatically selected. Each time the switch is pressed, the mode selection changes.

AUTO-DECELERATION SWITCH

This switch (2) acts to activate the function that automatically lowers the engine speed and reduces fuel consumption when the control lever is at neutral.

ON lights up:Auto-deceleration is actuated. OFF:Auto-deceleration is canceled.

Each time the switch is pressed, the auto-deceleration is actuated or canceled.

Heavy Lift Switch

Operate this switch (3) to increase the pushing-up power during operations.

When the switch is turned ON, the boom lifting power is increased if the boom is being operated independently to the RAISE position.