HANDLING AIR CONDITIONER

General Locations Of Control Panel

(1) Vent selector switch (Sending breeze from front or feet)

(1) Vent selector switch (Sending breeze to upper part of body or rear)

(2) Air circulation selector switch (Internal air circulation)

(2) Air circulation selector switch (External air circulation

(3) Temperature control switch (Cooling)

(3) Temperature control switch (Heating)

(4) Air flow selector switch (Low)

(4) Air flow selector switch (Medium)

(4) Air flow selector switch (High)

(5) Air conditioner switch

(6) Off switch

(7)Defroster selector lever

When the function of the switch is actuated, the pilot lamp for the switch lights up.

Vent Selector Switch

The direction of the airflow is different for this switch (1) depending on whether it is operated on air conditioner control panel 1 or on air conditioner control panel 2. Use differently or together according to the needs.

Control panel 1

Control panel 2

Sending breeze from front Sending breeze to upper part of body

Control panel 1

Sending breeze to feet

When Operating Air Conditioner Panel 1

Vent selector switch (wind flow from front)

When this switch (1) is pressed, the wind flow from the air conditioner all blows out from the front.

Control panel 2

Sending breeze from rear

Vent selector switch (wind flow to feet)

When this switch (1) is pressed, the wind flow from the air conditioner all blows out to the feet.

WHEN OPERATING AIR CONDITIONER PANEL 2

Vent selector switch (wind flow to face)

When this switch (1) is pressed, the wind flow from the air conditioner all blows out to the face.

Vent selector switch (wind flow from rear)

When this switch (1) is pressed, the wind flow from the air conditioner all blows out from the rear.

AIR CIRCULATION SELECTOR SWITCH (INTERNAL AIR CIRCULATION)

(Air conditioner control panel 1 and 2 the same)

When switch (2) is pressed, the air inside the cab is recirculated and no fresh air is taken in from outside. This position is used when heating or cooling the cab quickly or when the outside air is dirty.

AIR CIRCULATION SELECTOR SWITCH (EXTERNAL AIR CIRCULATION)

(Air conditioner control panel 1 and 2 the same)

When switch (2) is pressed, fresh air is taken into the cab during heating or cooling.

This position is used to bring in clean fresh air into the cab or to remove the mist from the cab windows.

TEMPERATURE CONTROL SWITCH (COOLING)

(Air conditioner control panel 1 and 2 the same)

The more the indicator is in the blue range, the lower the temperature is; the more the indicator is in the red range, the higher the temperature is.

The indicator range is divided into 7 levels, but within each range the temperature changes steplessly.

Use switch (3) to reduce the temperature. Press this switch to reduce the temperature of the air sent from the air conditioner.

The lower the temperature becomes, the further the indicator moves into the blue range.

TEMPERATURE CONTROL SWITCH (HEATING)

(Air conditioner control panel 1 and 2 the same)

Use switch (3) to increase the temperature. Press this switch to increase the temperature of the air sent from the air conditioner.

The higher the temperature becomes, the further the indicator moves into the red range.

AIR FLOW SELECTOR SWITCH (LOW)

(Air conditioner control panel 1 and 2 the same)

This switch (4) is used to adju st the air flow blowing out from the air conditioner. When this switch is pressed, the air conditioner is set to LOW, the smallest of the three levels of air flow.

AIR FLOW SELECTOR SWITCH (MEDIUM)

(Air conditioner control panel 1 and 2 the same)

This switch (4) is used to adjust the air flow blowing out from the air conditioner. When this switch is pressed, the air conditioner is set to MID, the middle of the three levels of air flow.

AIR FLOW SELECTOR SWITCH (HIGH)

(Air conditioner control panel 1 and 2 the same)

This switch (4) is used to adjust the air flow blowing out from the air conditioner. When this switch is pressed, the air conditioner is set to HIGH, the largest of the three levels of air flow.

AIR CONDITIONER SWITCH

(Air conditioner control panel 1 and 2 the same)

This switch (5) is used to switch the air conditioner ON/OFF.

OFF SWITCH

(Air conditioner control panel 1 and 2 the same)

This switch (6) is use to stop the fan.

Defroster

Use this defroster (7) to remove the mist from the front glass in rainy weather.

● Open the defroster vents and direct them to the front glass. (For normal operations, keep the defroster vents closed.)

● To remove the mist quickly, close the other vents.

● It is possible to use the defroster when the vent selection on air conditioner control panel 1 sends the wind flow to the feet and when the vent selection on air conditioner control panel 2 sends the wind flow to the face.

Control panel 1

Sending breeze from front

Control panel 2

Sending breeze to upper part of body

Control panel 1

Sending breeze to feet

Control panel 2

Sending breeze from rear

Use Air Conditioner With Care

Ventilation

● If you smoke when the cooler is on, the smoke may start to hurt your eyes, so turn the lever to FRESH to remove the smoke while continuing the cooling.

● When running the air conditioner for a long time, turn the lever to the FRESH position once an hour to carry out ventilation and cooling.

Temperature control

● When the cooler is on, set the temperature so that it feels slightly cool when entering the cab (5 – 6°C lower than the outside temperature). This temperature difference is considered to be the most suitable for your health, always be careful to adjust the temperature properly.