PROTECTIVE GUARD

NameSpecifications, use

FOPS

Protective guard

Front guard

This is to protect the operator. Always use it in places where there is danger from falling rock or other falling objects. For details of weight, see “SPECIFICATIONS (PAGE 5-2)”.

This is to protect the operator. Always use it in places where there is danger from flying soil or other flying objects.

Auto Greasing System

Features

● Continuous centralised greasing can be carried out completely automatically during operation of the machine.

● 5 min grease pump stopped → 1 min grease pump operated → momentary simultaneous centralised greasing → 5 min grease pump stopped

● It is possible to charge with grease without replacing the grease can.

Grease nipple (1) is provided at the bottom of the grease can inside the room under the cab in order to charge with grease.

● Matter of charging

1)Charge through grease nipple (1) using a grease gun.

After greasing is started, oil level gauge rod (2) extends under the internal pressure.

2)Charge with the grease gun until oil level gauge rod (2) reaches the FULL position.

● In the same way as with the standard automatic greasing system, the following locations cannot be greased by automatic greasing. Carry out greasing with a grease gun. For details of greasing, see “EVERY 10 HOURS MAINTENANCE (PAGE 4-56)”.

● Arm-bucket connecting pin (2 places)

● Arm-link connecting pin (2 places)

● Bucket cylinder rod pin (2 places)

● Link connecting pin (4 places)

● Arm-bucket connecting pin (2 places)

● Bucket-link connecting pin (2 places)