CGC MONITOR

Cgc Monitor

● The CGC monitor displays the condition of the machine, the maintenance situation, and messages for the operator and service man, and is also used to input the necessary data.

● The surface of screen (1) is equipped with touch buttons to input the data and change the screen.

● When the starting switch is turned ON, the opening screen is displayed for approx. 10 – 20 seconds. The condition of the machine is not displayed.

● If the ambient temperature of the monitor goes below –30°C or above 55°C, the back lighting is turned off to protect the screen. The display cannot be seen, but this is not an abnormality. When the temperature returns to within the range of –30°C to 50°C, the display will appear again, so carry out operations according to the CGC monitor.

Changes Of Screen And Content Of Display On Cgc Monitor

(1) Opening screen(5) Fuel consumption measurement screen

(2) Normal screen(6)Truck counter screen (3) Brightness control screen(7) Setting screen (4) Maintenance screen(8) Abnormality display screen

There are eight screens ((1) to (8)). The screen (1) to (8) can be changed by pressing the touch button. NOTICE

Set the date and time to match the local time. If the setting is not correct, the operating data will not be correctly recorded.

Opening Screen

After the starting switch is turned ON, it takes approx. 10 – 20 seconds for the condition of the machine to be displayed. During this time, the opening screen (1) is displayed.

Normal Screen

The screen (2) automatically switches to this screen approx. 10 seconds after the starting switch is turned ON. It displays the oil temperatures, water temperatures, and oil pressures on the meters. From this screen, press the touch button to switch to screens (3), (4), (5), (6), and (7).

Brightness Control Screen

If the brightness control button on screen (3) is pressed, the sub-screen is displayed on top of the normal screen.

Maintenance Screen

This screen (4) displays the remaining time to the next maintenance.

Fuel Consumption Measurement Screen

This screen (5) displays the fuel consumption during the desired period from the start of operations (starting engine) to the completion of operations (stopping engine).

Truck Counter Screen

This screen (6) is used to input the user ID and to reset the number of trucks loaded after it has been cleared.

Setting Screen

This screen (7) is used to set the language, date, time, and display unit.

Abnormality Display Screen

This abnormality display screen (8) automatically appears if any abnormality occurs. It is displayed in turn with the screens displayed in (1) to (4) for 7 seconds at a time. When the abnormality is removed, this screen automatically disappears.