ATTACHMENT GUIDE
ATTACHMENTS AND OPTIONS
CONTROL DEVICES
Inside cab
In the room under the cab
AUTO-GREASING SWITCH This switch (1) is inside the base under the cab and is used to switch between automatic and manual greasing. Normally, keep this switch at the AUTO position. When using a grease gun, set the switch to MANUAL.
AUTO GREASE/GREASE GUN SELECTOR LEVER This lever (2) is used to select automatic or manual greasing in the same way as the auto-greasing switch. Normally, keep this lever at the AUTO GREASE position. When using a grease gun, check first that the grease pump is not carrying out auto-greasing [if it is carrying out auto-greasing, wait until the grease pump stops (within approx. 1 minute)], then set the lever to the GREASE GUN position.
AUTO GREASING SELECTOR LAMP This lamp (3) informs the operator if the auto-greasing system is in auto-greasing status or in manual greasing status. When it is in auto-greasing status, the green AUTO lamp lights up. When it is in manual greasing status, the green MANU lamp lights up.
6-8
