IV. PREPARING TO OPERATE ATTACHING CUTTERS CONTINUED
Blade Rotation Left of Operator Hydraulic hoses on cutter heads should be hooked up so blades on heads mounted nt fro
left of operator rotate according to figure 4.23 and
figure
4.24
(counter-clockwise
from
above). Refer to 204 DETASSELER Parts Manual for correct hardware, hose lengths, and hydraulic schematic.
NOTE: Care should be taken when installing check valve (fig. 4.23, item 1) on cutter motor so the flow arrow is oriented correctly (either
1
two-head or three-head series). TWO-HEAD SERIES
IMPORTANT: Case drain hoses must be installed
FIG 4.23
correctly on cutter motors to prevent motor damage. Refer to parts manual.
nt fro
nt fro
THREE-HEAD SERIES
FIG 4.24 ATTACHING CUTTERS CONTINUED
