VII. SERVICE AND MAINTENANCE

DRIVE TRAIN Hydrostatic Pump

NEUTRAL SETTING - When the hydrostatic lever is in the neutral position, the machine should not be moving in either direction. If it does, the neutral setting of the lever (fig. 7.59) on the hydrostatic pump needs to be adjusted. See accompanying pump manual.

CHECK CHARGE PRESSURE - See page 46.

REPAIR/REPLACEMENT - See pump handbook accompanying this operator’s manual. Hydrostatic pumps are available as a core exchange item from Hagie Manufacturing Customer Support Department.

Auxiliary Gear Pumps

REPAIR/REPLACEMENT - See pump handbook accompanying this operator’s manual. Gear pumps are available from the Hagie Manufacturing Customer Support Department.

Wheel Motors

REPAIR/REPLACEMENT - See wheel motor handbook accompanying this operator’s manual. Wheel motors are available as a core exchange item from Hagie Manufacturing Customer Support Department.

Torque Hubs ®

GREASE - Grease according to page 99.

OIL - Maintain oil level ac cording to page 87.

REPAIR/REPLACEMENT - See Torque Hub® manual accompanying this operator‘s manual.