Checking Tire Pressure Tire Size
Inflation Pressure Max psi
Max kPa
10 x 16.5 10-ply Heavy-Duty Flotation
75
517
27 x 8.5 –15 8-ply Heavy-Duty
60
414
27 x 10.5 – 15 8-ply Heavy-Duty
59
407
6.5 x 16 – 5.50 Solid Rubber
-
-
7.00-15 SS Chevron Narrow 6-ply
60
414
Correct tire pressure should be maintained for all tires to enhance operating stability and extend tire life. Refer to the above chart for the proper inflation pressure. When installing tires, be sure they are the same size and style on each side of the loader. Always replace tires with the same size as the original equipment.
Electrical System Battery Before servicing the battery or electrical system, be sure the battery disconnect switch (if equipped) is in the “OFF” position. If not equipped with a disconnect switch, disconnect the ground (-) terminal from battery.
WARNING
The battery on the loader is a 12-volt, wet-cell battery. To access the battery, open the rear door and lift the engine cover. The battery top must be kept clean. Clean it with an alkaline solution (ammonia or baking soda and water). After foaming has stopped, flush the battery top with clean water. If the terminals and cable connection clamps are corroded or have a build-up, disconnect the cables and clean the terminals and clamps with the same alkaline solution. Explosive gas is produced while a battery is in use or being charged. Keep flames or sparks away from the battery area. ALWAYS charge the battery in a wellventilated area.
WARNING
Never lay a metal object on top of a battery, because a short circuit can result. Battery acid is harmful on contact with skin or fabrics. If acid spills, follow these first-aid tips: 1. Immediately remove any clothing on which acid spills.
50950260/G0521
83
