Instrument Panel (DPF Models) The instrument panel contains the following switches and indicators. Symbols on the panel represent various functions and conditions, and are visible only when indicator lamps are on. 1. Keyswitch – In a clockwise rotation, these positions are: OFF Position – With the key vertical, power from the battery is disconnected from the controls and instrument panel electrical circuits. This is the only position from which the key can be inserted or removed. ON (or RUN) Position – With the key turned one position clockwise from vertical, power from the battery is supplied to all control and instrument panel circuits. START Position – With the key turned fully clockwise, the electric starter engages, to start the engine. Release the key to RUN position after the engine starts. Note: The engine cannot be started unless the operator is sitting in the seat and the restraint bar is lowered. 2. Information Center Electronic Display – See page 34. 3. Fuel Level Gauge – Displays the amount of fuel in the tank. 4. Fasten Seatbelt – A momentary visual (and audible) indicator to remind the operator to fasten the seatbelt. 5. Engine Oil Pressure – Lights if the engine oil pressure drops too low, warning the operator to immediately stop the engine and determine the cause for the pressure drop. During normal operation, this indicator should be OFF. 6. Battery – Lights if the charging voltage is too high or too low. During normal operation, this indicator should be OFF. 7. Preheat Indicator Lamp – Lights when the (automatic) preheat is active. During normal operation this indicator should be OFF.
1
2
3
8
4
9
5 6
10
7
11
12
13
14
Figure 8 Instrument Panel 26
50950260/G0521
