BI619026
________________________________________________ Your safety Stopping operator’s compartment parking
Do not leave the operator’s compartment with the unit running. Always properly shutdown the unit before leaving the operator’s compartment. Always park the unit on solid, level ground. If this is not possible, park the unit at a right angle to the slope to prevent accidental movement of the machine. Use proper flags, warnings or barriers when parking in areas of traffic. Chock all four (4) wheels in both directions whenever possible.
Maintenance and repair Be sure to observe the prescribed maintenance and inspection intervals. Inform the supervisory personnel and the face crew of any maintenance and repair operations. Give them information on the intended operations and the anticipated duration.
© DBT AMERICA 2005
securing
Secure your working area over a wide range, in order to avoid endangering other persons. Disconnect the battery from the machine to prevent unauthorized and unintentional restarting. Protect your work area against falling rocks.
replacing components
Disconnect the battery from machine to prevent from restarting before replacing any defective components. Pass defective components removed on for servicing without delay in order to prevent these parts being reinstalled elsewhere.
original parts
lifting
Use only spare parts which satisfy the specified technical requirements. This is only ensured with original DBT America spare parts. Please refer to the spare parts lists for the order numbers. For raising the feeder breaker use only: ¾ crib blocks with adequate load-holding capacity. ¾ hoists, jacks or cranes with adequate load-carrying capacity. Avoid direct contact between the skin and hydraulic fluids.
handling hydraulic fluids Hydraulic fluid can penetrate the skin and cause serious infection. Never use hydraulic fluid for rinsing or cleaning. Hydraulic fluid represents a very serious danger to health.
_____________________________________________________________ DBT – 25M SERIES CONTINUOUS MINER © VUVR / 03 2.7
