BI619026
Your safety _________________________________________________ Safety precautions for operating the continuous miner training
The miner should not be operated until the operator has read and understood the operating instructions for the machine and is thoroughly familiar with the location, operation, and function of all controls. Miner should not be operated without all covers and guards properly mounted and secured. Ensure everyone is clear before starting or moving any part of the miner. Carefully test all machine functions before operating the miner.
Check work area for loose roof scale, remove as necessary. Disconnect main breaker to do any maintenance work. Observe all Federal, State, and Mine safety regulations. · Report any malfunctions or damage to supervisory personnel. Ensure cutter boom and tail conveyor boom are lowered before leaving machine unattended. · Ensure adequate ventilation prior to machine operation. Obey all safety regulations set forth by MSHA, State, Local, and Mine Management. Do not leave machine running unattended. ·Shut off main electrical power, unplug and lock out electrical cables/receptacles prior to performing any type of electrical repairs. · Never work or travel underneath a raised cutter boom, conveyor boom, stabilizer shoe, or gathering pan unless they are properly supported.
________________________________________________________________ 2.4 VUVR / 03___ DBT – 25M SERIES CONTINUOUS MINER ©
© DBT AMERICA 2005
Always wear safety glasses. Not only for your protection but for the protection of fellow workers. Should dust, etc. temporarily blind the operator the machine may become a hazard to both the workers and other equipment.
