7. Maintenance
Maintenance precautions • Always prepare the dump truck before starting any maintenance, adjustments or other work on the dump truck, see Service Position in the Safety Instructions chapter (Chapter 2).
• Fuel and oil are dangerous substances. Never handle fuel, oil, grease or oily clothes in places where there is any fire or flame. As preparation in case of fire, always know the location and the use of fire ex tinguishers and other fire fighting equipment.
• Wear a well-fitting helmet, safety shoes and working clothes. When drilling, grinding or hammering always wear protective goggles.
• Flames should never be used instead of lamps. Never use a naked flame to check leaks or level of oil, fuel, anti-freeze or electrolyte.
• Park the dump truck on firm, flat ground. Apply the Articulation Lock.
• When working with others; Choose a group leader, follow the leader's instructions. Do not perform any maintenance beyond the agreed work.
• Always stop the engine when performing maintenance near moving parts.
• During maintenance; Do not allow any unauthorised person to stand near the dump truck.
• Unless you have special instructions to the contrary, maintenance should always be carried out with engine stopped. If maintenance is carried out with the engine running, there must be two persons present: One operating the engine, and the other one performing the maintenance. In such a case, never touch any moving parts.
• Exhaust gas is dangerous. When working inside, be particularly careful to have good ventilation.
• Thoroughly wash the engine. In particular, be careful to clean the filler caps, grease fittings and the area around the dipsticks. Be careful not to let any dirt or dust into the system.
• Wash the dump truck, be careful not to wet electrical components or inside cab.
• Always use Moxy genuine parts for replacement.
• Always use the grades of grease and oil recommended by the manufacturer. Choose the viscosity specified for the ambient temperature. See chapter 6.
* Numbers refer to positions on the lubrication schedule, chapter 6 Operating & Maintenance Manual
137
