INSTRUMENTS/CONTROLS
TRAVEL CONTROL LEVERS AND PEDALS OPTIONAL PEDAL
CD00E012
CD00E012
This pedal is used for optional tools such as hydraulic breakers, etc. See “Auxiliary hydraulic circuits” in the “Operating Instructions” Section.
For machine travel, see “Machine travel” in the “Operating Instructions” Section.
TRIM THIS EDGE
NOTE: Travel speed either forwards or in reverse depends on the position of the travel speed selector. See “Systems display panel” (item 1).
IMPORTANT: Ask your CASE Dealer for advice on optional tools.
NOTE: The movements of the machine are shown in the “Control functions” decal. See “Decals” in the “Safety/ Decals/Hand signal” Section.
FOOTREST
CD00E012
66
TRIM THIS EDGE LEFT PAGE Bur 6-25930
