TOWING HOLES

The towing holes, located at the front and the rear of the undercarriage, are intended for moving heavy objects of up to 9 000 kg (10 tons) maximum. Make sure that the shackles, chains and tackle are in perfect condition and strong enough to move the load.

CD00E069

IMPORTANT: The load should always be kept in line with the undercarriage.

WARNING: This is a delicate maneuvrer which is always carried out at the risk of the user. The manufacturer’s warranty does not apply to any incidents or accidents which may occur during towing.

WARNING: The operation must be carried out very slowly, over a short distance and only if it is unavoidable.

CYLINDER MOUNTED LOAD HOLDING CONTROL DEVICES

SERVICE SPECIFICATIONS

Check by your CASE Dealer..........................................................Every 6 months The role of the safety valve is to stop the attachment from dropping due to valve spool leakage in neutral position or in the event of a line or hose accidentally breaking. In the latter event, they also ensure that the attachment may be lowered gently to the ground. See “Load handling” in the “Operating Instructions” Section.

CDOOE160

WARNING: Cylinder mounted load holding control devices are pilot operated. The operator MUST return the control lever to the neutral position to prevent the attachment and load from falling in the event that a hydraulic hose or line fails.