INSTRUMENTS/CONTROLS
ANTI-THEFT DEVICE To prevent the machine from being stolen it is possible to use the anti-theft system, which makes it necessary for a special code to be entered before the machine can be operated.
STEP 3
2
Your Case Dealer has to activate the system for it to be operational. Once this operation has been performed, a special access code has to be entered each time you start the engine.
1
IMPORTANT: Once the code has been entered, do not forget it, as it can not be changed without consulting your Case Dealer.
CD00E078
TRIM THIS EDGE
Place the starter switch key in “ON” position.
To enter the code (e.g. 1234) press button (1) the same number of times as the digit selected (e.g. once), then press button (2) to proceed to the second digit. Press the button (1) same number of times as the second digit (e.g. twice) and then press button (2) to proceed to the third digit. Repeat the procedure for the third and fourth digits.
STEP 2
STEP 4
Setting the Code Initially STEP 1
3
CD00E077
CD00E078
The message “Password” and four boxes will appear on the display screen.
Once all four digits have been entered, press button (3) for the code to be entered in the system. The audible alarm device will sound.
58
TRIM THIS EDGE LEFT PAGE Bur 6-25930
