MAINTENANCE/ADJUSTMENTS STEP 2
Template Name: OM_1_col Template Date: 1994_04_29
PDE0072 PDE0070
Lower the boom until the dipper is resting safety on a suitable stand. NOTE : Place the head of the dipper on a block of wood, so that the clamshell is laying in a horizontal position.
Another solution consists of placing the clamshell under the dipper in open position, with a wooden block under the dipper head and another between the clamshell and the dipper.
TRIM THIS EDGE
NOTE : Do not adopt this solution for narrow buckets. STEP 3 For removal follow Steps 3 to 12 for the removal of a dipper without a tool. STEP 4
Alt= to hide template information Alt+ to display template information
For installation, follow Steps 1 to 7 for the installation of a dipper without a tool.
PDE0071
When on the job site, with no suitable stand available, it is possible to improvise by using a pile of earth, or sand, which will stand the weight of the dipper without collapsing.
228
TRIM THIS EDGE
LEFT PAGE
