LUBRICATION/FILTERS/FLUIDS
P2AL Version. Use the dozer blade and the stabilizers to raise the machine so that the wheels are not no longer in contact with the ground. Then lower the attachment until the bucket is resting on the ground.
PH07835
Turn the wheel manually until the filling orifice is in the lowest position. STEP 5 Place a receptacle of a suitable capacity under the reduction gear, remove the plug and allow the oil to flow out. STEP 6
P2A+2A Version. Use the front and rear stabilizers to raise the machine so that the wheels are no longer in contact with the ground. Then lower the attachment until the bucket is resting on the ground.
Alt= to hide template information Alt+ to display template information
P2A Version. Use the stabilizers to raise the rear of the machine slightly so that the rear wheels are no longer in contact with the ground. Use the attachment to raise the front of the machine slightly, so that the front wheels are no longer in contact with the ground and place blocks under the front axle.
STEP 4
TRIM THIS EDGE
PL Version. Use the dozer blade to raise the front of the machine slightly so that the front wheels are no longer in contact with the ground. Use the attachment to raise the rear of the machine slightly so that the rear wheels are no longer in contact with the ground and place blocks under the rear axle.
Stop the engine and remove the starter switch key. CD97H004
Turn the wheel manually until the filling orifice is in horizontal position on the right and fill via this orifice until the oil is level with the edge of the orifice. STEP 7 Install the plug. STEP 8 Repeat Steps 4 through 7 for the other reduction gears.
253
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
STEP 3
