1 minute read
OPERATING INSTRUCTIONS
Template Date: 1994_04_29Template Name: OM_1_col
STEP 4 Loader application
TRIM THIS EDGE
CK97A005 Wait for five to ten seconds to allow the hook to retract. Operate the bucket control lever so as to disengage the pin.
STEP 5
CD97H003 The Quick Coupler allows you to reverse your buckets to serve as a loader.
CK97A008 Operate the dipper control lever so as to disengage the bucket.
144
TRIM THIS EDGE
LEFT PAGE
PARKING THE MACHINE
Park the machine on flat, level ground, away from soft ground, excavations or poorly shored cavities.
Align the upperstructure with the undercarriage, retract the attachment and anchor the bucket or clamshell in the ground. Raise the stabilizers (if equipped) completely and immobilize them using the lock pins and split pins located in the tool box. Raise the dozer blade (if equipped) and immobilize it using the lock pin and split pin located in the tool box.
Place the travel control lever in the neutral position. Engage the upperstructure swing lock pin. Immobilize the machine using the parking/work brake control switch. Stop the engine and remove the starter switch key. You must raise the left-hand control arm before leaving the operator’s compartment. Tilt the steering column towards the windshield. Lock the cab door.
Disconnect the electrical system using the battery master switch key. Make sure that the doors, hoods and access panels are securely locked or fastened. Check that no part of the machine is blocking the roadway. If this cannot be avoided, put in place the necessary traffic signs, as required by regulations.
WARNING: Never jump down from the machine. Always face the machine and use the steps and access handles when dismounting from the cab or upperstructure.
145
TRIM THIS EDGE
RIGHT PAGE TRIM THIS EDGE
