1850K
55
CAB SAFETY CAB
Do not climb or leave a machine while it is running. Do not jump off the machine.
Safety cab with roll-over protection structure (ROPS) and against falling objects (FOPS) safegarding the operator. The cab has two doors which can be open 90° (to be used only to enter the cab) assisted by gas filled cylinders and two hinged side panels, with lock in maximum open position, providing enough ventilation and reducing the inlet of dust. It is amply glazed and provides maximum operator comfort under whatever climatic condition.
Do not climb nor leave the machine while transporting equipment or other materials. When climbing or leaving the operator's compartment, do not use any control as a grabbing point.
Note – The key provided with the machine is universal, i.e. it operates the cab door locks, the side panels and the engine starting switch.
WARNING The protection offered by ROPS may be prejudiced by any damage or structural change. Inspect your seat belt periodically for signs of fraying, wear or other weaknesses leading to failure.
DOOR The door is open by the handle indicated in the figure, after opening its locks (incorporated in the handle itself) with the appropriate key.
1850-2M0081
Enter and exit the operator's compartment using the appropriate grab handles and stepping points. Before climbing the machine, clean and inspect steps and handrails. Climb and leave the machine facing it. Keep three contact points with steps and handrails.
Note – The three points can be two feet and one hand or two hands and one foot. 1850-2M0099
Carefully read personal and machine SAFETY PRECAUTIONS (at the beginning of this manual)
