2 minute read
COMFORT LEVELS
Machine manufactured by:
Address: Zona Industriale Surbo 73100 LECCE (LE) Telephone: (0832) 6881
This machine complies with the EEC Directives relative to safety of machines (Directives 89/392, 91/368, 93/44 and 93/68)
Series: 1850K
Model Technical type
1850K LT (Power Steering) 535.100.053
1850K XLT (Power Steering) 535.100.054
1850K LGP (Power Steering) 535.100.055
LT/XLT/LGP versions show the undercarriages of the machine: LT =7 rollers undercarriage XLT=8 rollers undercarriage LGP=8 rollers undercarriage (Low ground pressure)
-the machine must be equipped with a seat complying with the comfort criteria prescribed by EN ISO 7096: 2000;the same must be adjusted in accordance with personal requirements; -ensure that the machine is maintained in efficient conditions; -steer, brake, accelerate, shift gear and move the equipment without sharp manoeuvres; -when travelling, adjust the speed of the machine so as to minimise vibrations; -keep the work site in good conditions (remove stones and obstacles, fill ditches and holes etc.)
SERVICE
For the service operations not easily performed with the means available to the User. it is recommended that you contact the Sales Organization or the Service Centres, which have available skilled personnel, adequate tooling and genuine spare parts. The entire Organization is at the disposal of Customers to provide clarifications and recommendations or to intervene with its skilled personnel, whenever an irregular operation is experienced on your machine.
SPARE PARTS
To ensure a perfect performance of the machine, you are reminded that parts must be replaced exclusively with genuine spares. To order them it is necessary to specify: -type and serial number of the machine (plate B); -type and serial number of the engine (plate C); -the part number (from the Spare Parts Catalogue) of the part being ordered.
COMFORT LEVELS
Noise at operator's seat (with sound suppression option)
Evaluated on identical machines, in accordance with EEC Directive 95/27 ISO 6396 Standard machine LpA = 81 dB (A)
Noise outside the machine
Level of guaranteed noise power, determined in accordance with European Directive 2000/14/CE Standard machine LWA = 111 dB (A)
LEVEL OF VIBRATIONS
Level of vibrations on hands and arms: from investigations conducted on machines identical to this one, under travel and digging conditions over cycles of different lengths, it is assumed that the level of vibrations is EQUAL or LOWER than ?,?? m/s2 . The value must be considered weighted rms with the "wide band" method and weighting complying with ISO 2631-1. Level of vertical vibrations on the operator's seat: from investigations conducted on machines identical to this one, under travel and digging conditions over cycles of different lengths, it is assumed that the level of vibrations is EQUAL or LOWER than ?,?? m/s2 LTS "ON" ?,?? m/s2 LTS "OFF"
The value must be considered rms weighted with the "wide band" method and weighting in compliance with ISO 7096 and ISO 2631-1. The exposure to vibrations by the operator can be reduced when the following recommendations are considered: -always use the most appropriate equipment for the type of work to be performed;
