Replacing the keyboard Tools you need to complete this task: v
Flat-blade driver
- OR -
Scribe or non-marring tool
Phillips #0 screwdriver
Screws removed during this task:
2 black M2.5×5 (Keyboard cover)
To replace the keyboard:
80
1
Complete the steps in “Preparing the notebook” on page 55.
2
Remove the keyboard cover by following the steps in “Replacing the keyboard cover” on page 78.
3
Lift the center of the back edge of the keyboard slightly and, at the same time, press inward on the left side and then the right side. This will release the keyboard from the side tabs.
4
Slowly slide the keyboard toward the LCD panel to release the keyboard retaining tabs located on the front edge of the keyboard.
5
Carefully rotate the keyboard toward you so it lies keys-down on top of your notebook. Be careful not to damage the LCD panel.
Chapter 3: Replacing notebook components
