Engine Removal and Installation
Determining Minimum Engine Height
B
A C
1.
To determine minimum engine height, use a level (A) placed on top of the transom, measure from bottom of level to top of elbow (B) and record distance.
2.
Measure from bottom of level to static water line (C) and record distance.
3.
Subtract dimension (B) from dimension (C) and record result. See engine height requirements below: • Measurement (B) minus (C) should not be less than 14 in. (35.6 cm).
4.
When engine installations do not meet these specifications, an exhaust elbow high-rise kit must be installed.
NOTE! An installation that permits water to enter the engine through the exhaust manifolds) will not be covered by warranty, unless damage is due to defective part(s).
154
VPA 7743358 03-2003
