Attachments General Instructions Use only approved attachments. Mustang Manufacturing cannot be responsible if the machine is used with non-approved attachments. Read the operator’s manual provided with all attachments used with the machine before starting the engine. A loaded attachment changes the center-of-gravits of the machine. Use caution! Never exceed the rated capacity (See “Weights (Equipped w/ 2-Post ROPS)” on page 30). Before using an attachment, check that the attachment is undamaged and properly connected and locked.
WARNING
WARNING
Practice using an attachment before working with it.
Connecting Attachments
WARNING locked.
Check that hitch pins and auxiliary hydraulic connections are properly connected and
Standard All-Tach® Hitch Connection 1. Position the attachment so the attachment flange fits over the top lip of the hitch (Figure 52). 2. Pull the joystick rearward until the attachment is flush against the hitch surface. 3. Perform “Mandatory Safety Shutdown Procedure” on page 8.
Figure 52 – Standard All-Tach® Hitch Positioning
918444/AP0210
59
