GUZum_breva1100#06_##uk.book Page 84 Wednesday, March 8, 2006 6:14 PM
3
8
1
7
9 PARKING LIGHT BULB
Do not pull on the wires to extract the bulb connector.
Do not pull on the wires to extract the bulb connector.
u Grasp the bulb connector (5) and pull to
u Remove the rubber element (8). u Grasp the parking light (9) bulb holder
NOTE
Insert the bulb into the bulb holder, making sure to match the locating slots.
u Fit a new bulb of equal rating. u Engage the springs (6). u Connect the connector (5).
84
use and maintenance Breva
4
10
LOW BEAM BULB
disconnect it from the bulb. u Release the two ends of the spring (6). u Extract the bulb (7) from its seat.
2
and pull to extract. u Remove the bulb (10) and fit a new bulb of equal rating. u Refit the bulb holder (9) in its seat and the rubber element (8).
CHANGING THE FRONT AND REAR TURN INDICATOR BULBS Carefully read page 82 (BULBS). u Place the vehicle on the stand, see page
55 (PUTTING THE VEHICLE ON THE STAND). u Unscrew and remove the screw (1).
CAUTION While removing the lens, proceed carefully in order not to break the locating peg. u Remove the lens (2).
