BULBS

3

1 2

BEAM VERTICAL ADJUSTMENT

u Place the vehicle upright. u Adjust headlight beam, turn screw (2).

When finished:

WARNING

Check for correct beam horizontal setting. BEAM HORIZONTAL ADJUSTMENT

u Place the vehicle on the stand, see page 55 (PUTTING THE VEHICLE ON THE

STAND). u Remove the two screws (1) (one each side). u Hold the light up and turn screw (3) to set the beam. u Refit the light and start both screws (1) in their thread and check for beam correct setting. u If it is correct, tighten both screws (1).

When finished:

WARNING

Check for correct beam vertical setting.

BULBS

Carefully read page 57 (MAINTENANCE).

Fire hazard.

WARNING

Keep fuel and other flammable substances away from electric components.