CHANGING THE FRONT AND REAR TURN INDICATOR BULBS

8 3 2

7

LOW BEAM BULB Do not pull on the wires to extract the bulb connector.

u Grasp the bulb connector (5) and pull to disconnect it from the bulb. u Release the two ends of the spring (6). u Extract the bulb (7) from its seat. NOTE Insert the bulb into the bulb holder, making sure to match the locating slots. u Fit a new bulb of equal rating. u Engage the springs (6). u Connect the connector (5).

9 10

PARKING LIGHT BULB Do not pull on the wires to extract the bulb connector.

u Remove the rubber element (8). u Grasp the parking light (9) bulb holder and pull to extract. u Remove the bulb (10) and fit a new bulb of equal rating. u Refit the bulb holder (9) in its seat and the rubber element (8).

1 4

CHANGING THE FRONT AND REAR TURN INDICATOR BULBS

Carefully read page 82 (BULBS).

u Place the vehicle on the stand, see page 55 (PUTTING THE VEHICLE ON THE

STAND). u Unscrew and remove the screw (1).

CAUTION

While removing the lens, proceed carefully in order not to break the locating peg.

u Remove the lens (2).