V-MAC Co-Pilot Operator's Manual 81 CO-PILOT® OPERATIONS This chapter is intended as a general overview to operations.
Using the Co-Pilot® Note: Turn the ignition key to the ON position before operating the Co-Pilot®. When the ignition key is turned to the ON position, the Co-Pilot® automatically turns on. The MACK Logo Intro screen appears for several seconds and is usually followed by the last Anytime screen that was active prior to power-down. If Vehicle Management and Control (V-MAC) IV is programmed to “get driver” at key-on, then the CHANGE DRIVER screen will appear. Messages on the screen will prompt the ↵ ) button to accept the driver ID or use the Co-Pilot® driver to press the Enter (↵ stalk switch to enter a password. ↵ ) button before beginning a trip to make the Remember to press and hold the Enter (↵ stationary MAIN MENU screen appear. ↵ ) button on the stalk switch to turn it on. Note: If the screen is black, press the Enter (↵ Note: It is also possible to retrieve engine hours and odometer readings with the ↵ ) button on the stalk switch. ignition OFF; simply press and hold the Enter (↵
