CO-PILOT SYSTEM OVER VIEW

ESC Button

The ESC (Escape) button the stalk switch takes the - Pilot back the previous screen level the

Note : The ESC button does not function Start -

Enter ( ↵ ↵ ↵ ) Button

The Enter ( ↵ ↵ ↵ ) button the stalk switch selects the highlighted menu items during menu During Start - and when moving the the Enter ( ↵ ↵ ↵ ) button also used confirm acknowledge a pop - the Enter ( ↵ ↵ ↵ ) button takes the - Pilot display back the previous

& Down Buttons

The & Down buttons the end the stalk switch allow the user highlight the various available menu these buttons are used enter information into the

• Button Once the top the menu items that can selected, pressing the button will take the - Pilot display the last item the menu.

• Down Button Once the bottom the menu items that can pressing the Down button will take the - Pilot display the first item the

Screen T ypes

The - Pilot® contains six types display screens:

• Start - Scr eens A group screens that appear when the vehicle management and control vehicle management and control - MAC) system ener Individual Start - screens are discussed more detail

• Menu Scr eens A group screens that appear with a menu selection depending whether the vehicle stationary moving. Individual Menu Screens are discussed more detail .

• Anytime Scr eens A group screens that can displayed a driver any time (whether the vehicle moving Individual Anytime Screens are discussed more detail

• Stationary Scr eens A group screens that only accessible when the vehicle stationary ehicle Speed = 0). These screen choices disappear from the stationary MAIN MENU screen when the vehicle begins moving and are replaced with the last anytime screen. Individual Stationary Screens are discussed more detail .

• Interrupt Scr eens A group special screens that appears during startoperation notify the driver certain critical When Interrupt screen the driver must one three things:

1 Key - the requested information.

2 Press the Enter ( ↵ ↵ ↵ ) button acknowledge the screen and turn f the warning and/or

3 T ake appropriate action correct the condition that triggered the alarm.

For example, the DRIVER ROAD SPEED ALARM screen appears, decelerate until the vehicle speed drops below the limit which triggered the alarm.

Individual Interrupt Screens are discussed more detail .

• Optional Systems Scr eens A group special screens that are accessible depending upon availability

Individual Option Systems Screens are discussed more detail

Screens

The following screens allow a driver specific entered via the Driver Information Display This option allows various vehicle information recorded for the driver associated with the driver The can changed from the Driver Information Display (DID) using the stalk switch control lever the vehicle has the Driver feature, when the vehicle started the Enter Driver screen appears the DID. The operator enters the appropriate driver that time.

1 The first number will highlighted the DID Use the and down arrows the stalk switch control lever scroll the appropriate number .

2 Once the correct number found, press the Enter button the stalk switch control lever

3 The next number the Driver sequence highlighted. Enter all the numbers for the Driver using these steps. W3067466

Once the Driver has been entered press the Enter button the stalk switch control lever . The Command Accepted screen displays. Press Enter again. W3067469 driver does not enter the Driver after starting the vehicle the Enter Driver screen displays. The Driver should entered the next vehicle stop. This screen will display every minutes until the proper entered. There also audible warning emitted until the Driver entered well. W3067466

Once the Driver has been entered press the Enter button the stalk switch control lever . The Command Accepted screen displays. Press Enter again.

W3067469 there a system issue with confirming the Drivers the ERROR Driver Number Not A vailable screen displays.

W3067470 driver does not enter the Driver the Driver not Enter screen displays. The Driver should entered the next vehicle stop. This screen will display every minutes until the proper entered. There also audible warning emitted until the Driver entered well. W3067468 the Driver entered and the vehicle turned f for less than minutes then the Current Driver screen displays. Enter the Driver and press Enter . The Driver will verified via the vehicle ECU. W3067467